40 v, 17 a p-channel trench power mosfet with reverse battery protection DJR0417 data sheet DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 1 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 description DJR0417 is p-channel trench power mosfet designed for the load switch of automotive electronic units requiring the reverse battery protection. since DJR0417 has a bidirectional diode between drain and source, the reverse battery protection can be realize d with only one load switch. features v (br) dss ---------------------------- ? 40 v ( id = ? 100 a ) i d ------------------------------------------------------ ? 17 a r ds(on) ------ 75 m max . ( id = ? 8.5 a, v gs = ? 10 v ) automotive qualified load switch can configure by only one component for reverse battery protection compliant with rohs directive typical application battery gnd load main switch gnd DJR0417 load reverse battery protection battery gate driver micro- computer micro- computer gate driver is not required package to252 (1) (2) (3) (3) (2) (1) not to scale equivalent circuit d(2)(4) s(3) g(1) sub-mosfet r g 100 (typ.) schottky diode body diode application car battery (4) (1) gate (2)(4) drain (3) source downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 2 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 absolute maximum ratings unless otherwise specified, t a = 25 c parameter symbol test conditions rating unit drain to source voltage v ds ? 40 v source to drain voltage v sd ? 16 v gate to source voltage v gs ? 15,+ 0 v continuous drain current i d t c = 25 c ? 17 a single pulse avalanche energy e as v dd = ? 15 v, l = 1 mh, i as = ? 17 a, unclamped, refer to figure 1 230 mj power dissipation p d t c = 25 c 48 w operating junction temperature t j ? 55 to 1 50 c storage temperature range t stg ? 55 to 1 50 c maximum drain to source dv/dt dv/dt 0.075 v/ns thermal characteristics unless otherwise specified, t a = 25 c parameter symbol test conditions m in . t yp . m ax . unit thermal resistance ( junction to case) r jc ? ? 2.6 c/w electrical characteristic unless otherwise specified, t a = 25 c parameter symbol test conditions m in . t yp . m ax . unit drain to source breakdown voltage v (br) dss i d = ? 100 a, v gs = 0 v ? 40 ? ? v drain to source leakage current i dss v ds = ? 40 v, v gs = 0 v ? ? ? 100 a gate to source leakage current i gss v gs = ? 15 v ? ? ? 100 a gate threshold voltage v gs( th ) v ds = ? 10 v, i d = ? 1 ma ? 1 .0 ? 1.75 ? 2.5 v static drain to source on -resistance r ds( on ) i d = ? 8.5 a, v gs = ? 10 v ? 50 75 m i d = ? 5 a, v gs = ? 4.5 v ? 130 350 m total gate charge (v gs = 10 v) q g v ds = - 15 v i d = ? 8.5 a v gs = ? 10 v ? 75 ? nc gate to source charge q gs ? 9 ? gate to drain charge q gd ? 30 ? turn-on delay time t d(on) v dd = ? 15 v i d = ? 8.5 a r g = 10 , r l = 1.53 , r gs = 50 v gs = ? 10 v refer to figure 2 ? 90 ? ns rise time t r ? 450 ? turn-off delay time t d(off) ? 990 ? fall time t f ? 910 ? source to drain breakdown voltage v (br) sd i s = ? 1m a, v gs = 0 v ? 16 ? ? v downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 3 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 test circuits and waveforms v dd i d v ds r g v gs 0 v l g s d i as i d v (br)dss v ds v dd 00 (a) test circuit (b) waveform figure 1 unclamped inductive switching v ds v dd r g r l v gs 0 v p.w. = 10 s duty cycle 1 % g s d r gs t d(on) t r t on t d(off) t f t off 90% 10% 90%10% v gs v ds 0 0 (a) test circuit (b) waveform figure 2 switching time dd (br)dss (br)dss 2 as as v v v il 2 1 e ? ? ?? ? downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 4 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 performance curves 0 5 10 15 20 0 1 2 3 4 5 i d (a) v ds (v) i d -v ds characteristics(typical) - - - - - - -- - v gs = -4.5v - 5v - 10v - 6v tc=25 c 0 5 10 15 20 0 1 2 3 4 5 6 7 i d a v gs v i d -v gs characteristics (typical) v ds = - 10v - - - - - - - - - - - tc = - 55 25 85 150 0 2 4 6 8 10 0 5 10 15 v ds (v) v gs (v) v ds - v gs characteristics (typical) id= - 17a id= - 5a id= - 10a - -- - - - - - 0.5 1.0 1.5 2.0 2.5 - 100 - 50 0 50 100 150 200 v th (v) v th - t c characteristics (typical) tc ( c ) v ds = - 10v i d = -1ma - - -- - downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 5 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 0 20 40 60 80 100 - 100 - 50 0 50 100 150 200 r ds (on) (m ) r ds(on) -t c characteristics (typical) i d = -8.5a v gs = - 10v tc ( c ) 0 2 4 6 8 10 0 20 40 60 80 v gs (v) qg (nc) v gs -q g characteristics (typical) i d = -8.5a v dd = - 15v tc=25 c - -- - - 16 17 18 19 20 21 22 23 24 - 100 - 50 0 50 100 150 200 v (br)sd (v) v (br)sd - t c characteristics (typical) i d = -5ma tc ( c ) -- - - - - - - - 20 30 40 50 60 - 100 - 50 0 50 100 150 200 v (br)dss (v) v (br)dss - t c characteristics (typical) i d = -1ma tc ( c ) -- - - - downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 6 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 0 50 100 150 200 250 25 50 75 100 125 150 e as -tc characteristics e as mj tc ( c ) 0 5 10 15 20 0 25 50 75 100 125 150 i d -t c characteristics tc ( c ) i d a -- - - 0 10 20 30 40 50 60 0 25 50 75 100 125 150 p d (w) p d -t a derating with infinite heatsink ta ( c ) 0.1 1 10 100 0.1 1 10 100 i d (a) v ds (v) safe oparating area tc=25 c single pulse r ds (on) limited pt=10ms pt=1ms pt=100us - - - - - - - - downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 7 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 rth (j- c) ( c/ /w) p.t. (sec) transient thermal resistance - pulse width tc=25 c single pulse downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 8 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 external dimensions to252 notes: dimension is in millimeters pb -free. device composition compliant with the rohs directive marking diagram part number y m d d djr 0417 lot number y is the last di git of the y ear ( 0 to 9) m is the month (1 to 9, o, n or d) dd is the date (two digit of 01 to 31 ) sk downloaded from: http:///
DJR0417 DJR0417 - ds e rev. 1.1 sanken electric co.,ltd. 9 dec. 17 , 2 01 5 http://www.sanken-ele.co.jp/en/ ? sanken electric co ., ltd. 2015 important notes all data, illustrations, graphs, tables and any other information included in this document as to san ken s products listed herein (the sanken products) are current as of the date this document is issued. all contents in this document are subject to any change without notice due to improvement, etc. please make sure that the co ntents set forth in this document reflect the latest revisions before use. the sanken products are intended for use as components of electron ic equipment or apparatus (transportation equipment and its control systems, home appliances, office equipment, telecommunication eq uipment, measuring equipment, etc.). prior to use of the sanken products, please put your signature, or affix your name a nd seal, on the specification documents of the sanken products and return them to sanken. if considering use of the sanken p roducts for any applications that require higher reliability (traffic signal control systems or equipment, disaster/crime alarm systems, etc.), you mu st contact a sanken sales representative to discuss the suitability of such use and put your signature, or affix your n ame and seal, on the specification documents of the sanken products and return them to sanken, prior to the use of the sa nken products. any use of the sanken products without the p rior written consent of sanken in any applications where extremely hi gh reliability is required (aerospace equipment, nuclear powe r control systems, life support systems, etc.) is strictly prohibited. in the event of using the sanken products by either (i) combining other prod ucts or materials therewith or (ii) physically, chemically or otherwise processing or treating the same , you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. although sanken is making efforts to enhance the quality a nd reliability of its products, it is impossible to completely avoid th e occurrence of any failure or defect in semiconductor products at a certain rate. you must take, at your own responsibility , preventative measures including using a sufficient safety design and con firming safety of any equipment or systems in/for which the sanken products are used, upon due consideration of a fa ilure occurrence rate or derating, etc., in order not to cause any hum an injury or death, fire accident or social harm which may result from any f ailure or malfunction of the sanken products. please refer to the relevant specification documents and sanken s official website in relation to derating. no anti-radioactive ray design ha s been adopted for the sanken products. no contents in this document can be transcribed or copied without sankens prior written consent. the circuit constant, operation examples, circuit examples, pattern la yout examples, design examples, recommended examples and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of use of the sanken products and sanken assumes no responsibility whatsoeve r for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, users or any third party, resulting from the foregoin g. all technical information described in this document (the technical info rmation) is presented for the sole purpose of reference of use of the sanken products and no license, express, implied or otherwise, is granted hereby under any intellectual property rights or any other rights of sanken. unless otherwise agreed in writing between sanken and you, sank en makes no warranty of any kind, whether express or implied, as to the quality of the sanken products (including the merch antability, or fitness for a particular purpose or a special environment thereof), and any information contained in this document (inclu ding its accuracy, usefulness, or reliability). in the event of using the sanken products, you must use the sam e after carefully examining all applicable environmental laws and regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the eu rohs directive, so as to be in strict compliance with such applicable laws and re gulations. you must not use the sanken products or the technical informatio n for the purpose of any military applications or use, includ ing but not limited to the development of weapons of mass destruction. in the event of exporting the sanken products or the technica l information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each country including the u.s. export administration regulations (ear) and the fo reign exchange and foreign trade act of japan , and follow the procedures required by such applicable laws and regulations. sanken assumes no responsibility for any troubles, which may occur during the transportation of the sanken products including the falling thereof, out of sankens distribution network. although sanken has prepared this document with its due care to pursue the accuracy thereof, sanken does not warrant that it is error free and sanken assumes no liability whatsoever for any an d all damages and losses which may be suffered by you resultin g from any possible errors or omissions in connection with the contents included herein. please refer to the relevant specification do cuments in relation to particular precautions when using the sanken p roducts, and refer to our official website in relation to general instructions and directions for using the sanken products. downloaded from: http:///
|
